Unimark EC3000 Series Spezifikationen PDF herunterladen (Seite 126)

AIMS Attachment A: AIMS Statement of Work

Page 66 of 130

2. Additionally, upon such a failure, the system administrator shall receive

a warning message on the system administrator workstation and an e-

mail, pager, or text message notification, notifying him of the failure.

Server failure shall include any hardware or software based failure.

Should a DDC fail, the system shall immediately notify the system

administrator via the EVIDS management system. The

CONTRACTOR is responsible for providing all hardware, software,

and WAN/PSTN access necessary to support the notification functions.

3. Each DDC shall have remote administration and monitoring

capabilities. This capability shall allow the specific machine to be

remotely configured and to provide a status report to the management

system. Data included in the reporting capabilities shall include: data

pertaining to the machine's memory, storage devices, network

connections, and general health of the machine.

4. All failures of the system shall be logged at a central control point (i.e.,

EVIDS Application Server). The failure shall initiate alarms and reports

(e.g., time and date of failure event). In the event that a workstation

component goes out of service, the central control log shall be

updated. Therefore, where practical, a positive relationship (e.g.,

system heart beat) shall exist between all components of the systems

at all times.

3.4.9 EVIDS Performance Requirements

A. In addition to the performance requirements listed in Section 3.10, the

EVIDS shall conform to the following:

1. The system shall be capable of supporting all DDCs and display

devices as specified in this document within the performance

requirements as outlined herein.

2. In the event of a failure of a DDC that is used to control a display within

a public display bank, the system shall automatically reconfigure the

page displays within the display bank to ensure that the flight

information that was to be displayed on the failed DDC/monitor is

displayed on other monitors. In the instance of a DDC failure, the

system shall automatically reconfigure the timing window, or utilize

another mechanism, to ensure that no gaps in the displayed flight

information are present. For example, if a DDC supporting a display

showing flights from 10:15 AM to 10:45 AM fails, the system shall

reconfigure the displays such that the other DDCs display the flights

during this time period.

Exhibit 3

Page 126 of 278

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 277 278

Keine Kommentare

Unimark EC3000 Series Spezifikationen Seite 126