Unimark XP Bedienungsanleitung PDF herunterladen (Seite 4)

Page 4 of 23

2 Red 3

7 Black 7

6 Purple 20

5 Yellow 11

3 pins jumpered

at the male or

printer end.

Note: Pinning for Cable 1 should not be necessary for a Go! via the Internet installation. Details

are provided in order to verify the pinning on a cable which is suspected to be a “Cable 1”.

b. Pigtail Cable 2

PC End Cable Printer End

9 Pin Female 25 Pin Male

3 Red 2

5 Black 7

6 Purple 6

8 Yellow 5

c. 9 to 25 Pin Serial Printer Cable 3

PC End Printer End

9 Pin Female 25 Pin Male

3 Red 3

5 Black 7

6 Purple 20

8 Yellow 11

3 pins jumpered

at the male or

printer end.

3. Printer Preparation:

1. Plug in the printer power cord to an outlet and to the printer.

2. Power on the printer and load stock.

4. COM (Serial) Port Attachment:

1. Attach the large end of the cable provided to the back of the printer in the upper of the two 25 PIN

ports.

2. Attach the smaller end to an open COM port on the back of the workstation.

3. If there are 2 COM Ports, Note the port name: COM1 = (A) or COM2 = (B).

5. LPT (Parallel) Port Attachment:

1. Attach the pinned end of the cable to the parallel port on the back of the workstation.

2. Attach the slotted end of the cable to the port on the back of the printer.

B. Setting Up the TI 885 as an Itinerary Printer or Ticket Printer

1 2 3 4 5 6 7 8 9 ... 22 23

Keine Kommentare

Unimark XP Bedienungsanleitung Seite 4