Unimark XP Bedienungsanleitung PDF herunterladen (Seite 11)

Page 11 of 23

2. Have available a blank, formatted, 3.5 inch, 1.44Mb. diskette.

3. Put a blank diskette in your computer

4. Download and run this file (i.e. UnimarkSprite.exe ) This file is located on the Go! Toolkit. You

can find this information at:

http://dls3.wspan.com/gomerge/secure/Webhelp/PrinterHelp.htm

then click on Unimark and the information is the first topic.

NOTE: When this file is run, it will extract the necessary files to the blank diskette.

5. Place the diskette in your Unimark Sprite printer

6. Boot the Unimark Sprite printer with the diskette inserted.

The Unimark Sprite is now ready for printing with Go! Res.

(***Note: See Section III if running Windows XP , Section IV if running Windows 2000.)

E. Setting up the TI 810 as an Itinerary / Ticket (Canada) Printer

1. Pencil switch (or DIP switch) settings 2,3,6,7 are ON (closed), everything else is OFF (open). The

switch settings are just below the form length dial..

2. The form length dial needs to be set to applicable paper length. (Typically 11 for standard itinerary

stock), but can be adjusted per the type of stock used. For instance, the dial can be changed to 7

for 7 inch TAT stock used in Canada. Use the table below for common stock types and the

appropriate dial setting.

3. TI 810 Dial Settings, Common Stock Type Table

7 = 7" (TAT) Transitional Ticket Stock 12= 12" Hardcopy

3.5= 3.5" Boarding Pass Stock 14= 14" LLI/Hardcopy

11= 11" LLI/Hardcopy

F. Setting up the Genicom 1600 as an ATB Printer

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 22 23

Keine Kommentare

Unimark XP Bedienungsanleitung Seite 11