Page 10 of 23
48-Switzerland
49-Canadian French
Miscellaneous
82-Auto OCR-A On Line Q, Columns 26-46
83-Send DC1 When READY, DC3 When BUSY
84-LF/CR On Receipt Of Linefeed
85-LF/CR On Receipt Of Carriage Return * This Should Be Off for GVI
87-Print All Control Characters
8A-Enable Busy On Pin 20(DTR) Of RS-232 Connector
91-Controls Burster
92-Controls Coupon Counter * This Is Disabled If Stacker II Is Installed
93-Doublestrike (Only Works In Dial Positions B/D/E/F)
94-Bar Code Support
If 94 Is ON, The Printer Initially Assumes That A Bar Code Reader Is
Present. After Trying To Communicate With The Reader For 4 Seconds And
Nothing Occurs-The Printer Then Assumes No Reader Is Present
95-Controls Tear Off Delay (Increases To 20 Seconds)
96-Drops The Stock On Park
97-Pseudo Codes In Effect
98/99-Print Head Movement (See Table Below)
Table
98 99 Function On Formfeed
Off Off Printhead Retains Current Position
Off On Printhead Moves To The Far Left
On Off Printhead Moves To The Center
On On Printhead Moves To The Far Right
9B-Controls Power Up Online
9C-256 Byte Buffer If On-Full Buffer If Off
9E-Clears Receive Buffer When Paper Out Is Indicated
9F-Enable Formatter
4. Adjusting Top Of Form
1. Press Command button
2. Press FORM FEED button once
Adjust stock as necessary using the form align up or down buttons
18 Presses = One Character
24 Presses = one Line
3. Press FORM FEED once
4. Press Normal Command Normal. To save settings
5. Adjust The First Print Line
1. Press Command
2. Press TEAROFF once
Adjust stock as necessary using the form align up or down buttons
18 Presses = One Character
24 Presses = one Line
3. Press TEAROFF once
5. Press Normal Command Normal
After all steps have been complete, the Normal light will turn on, and the Command and Menu lights will turn off.
Table 5 above defines all the dial settings and Table 6 defines configuration codes for the TI895 printer. The same
instructions and changes above, would apply when connected to a PC running Win2000 or XP.
D. Setting Up the Unimark Sprite As A Ticket Printer
1. Customer should follow Unimark’s manual for hardware assembly.
(9 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern