Unimark XP Bedienungsanleitung PDF herunterladen (Seite 2)

Worldspan Services Ltd, Confidential

Prepared by Michael Merhej

May 26

2005

Every One-month or every 5000 coupons (more often in high-volume applications),

inspect the Unit for unusual wear or damage to components. The inspection will take

less than 10 minutes.

 Carefully inspect the outer surfaces of the Unit’s enclosure for signs of

excessive internal heat buildup. Visual evidence of excessive internal

heat buildup may be confirmed by observation of discoloration or

warping of the covers surrounding the electronic components.

 Examine the Unit’s external and internal surfaces, ventilation

slots, transport mechanism, and exposed components for dust

buildup. All dust should be removed at least every month to

maintain performance.

If cleaning is required, complete the recommended cleaning procedures listed in the

following sections.

Using the Cleaning Card

The Cleaning Card is saturated in a 99% Isopropyl Alcohol cleaning solution, and has

been designed to be fed through the transport mechanism and clean the print head,

print head platen, and encoder drive wheels.

Cleanings cards are available from Unimark by calling local customer service. The

part number for the cleaning card is 700-5014-600 (single), or the card may be

ordered as a kit of five (-605K), twenty-five (-625K), etc.

Do not remove the card from the sealed pouch until you are ready to insert the card into

the Unit.

To use the cleaning card:

 Power the Unit on.

 Take the Unit off-line (press the ONLINE key).

 Press the ENTER key to enter the menu system.

 Press the UP/DOWN arrow key until the “Print Tests” menu appears.

 Press the ENTER key to access this menu.

 Press the UP/DOWN arrow key until the “Cleaning Card” option

appears.

 Press the ENTER key.

 Tear open the pouch containing the cleaning card.

1 2 3 4 5 6 7 8 9

Keine Kommentare

Unimark XP Bedienungsanleitung Seite 2