Unimark Sprite Bedienungsanleitung Seite 1

April 2005 Prepared By Jon Robson-Hurst INSTALLATION OF UNIMARK SPRITE PRINTER

April 2005 Prepared By Jon Robson-Hurst Sprite Menu Structure The Sprite MENU key

April 2005 Prepared By Jon Robson-Hurst The communications defaults are: Baud Rate

April 2005 Prepared By Jon Robson-Hurst Setting Stock Type Set bin stock to form 5

April 2005 Prepared By Jon Robson-Hurst Set Magnetic Encode to Yes, Magnetic SCN/

April 2005 Prepared By Jon Robson-Hurst EncodeB = TRUE VerifyB = FALSE SCN-B = TRUE As

April 2005 Prepared By Jon Robson-Hurst RotateLogo = TRUE PgmVersion = 46-235501H AEA9

April 2005 Prepared By Jon Robson-Hurst TEST THE PRINTER If you have successfully ins

April 2005 Prepared By Jon Robson-Hurst This document will give you a step-by-step p

April 2005 Prepared By Jon Robson-Hurst STEP 2 Once you are in the blue screen, cli

April 2005 Prepared By Jon Robson-Hurst STEP 3 Once the Configure To option is s

April 2005 Prepared By Jon Robson-Hurst After all is completed click on Save at the

April 2005 Prepared By Jon Robson-Hurst HPM Install initializes and the first screen

April 2005 Prepared By Jon Robson-Hurst After reboot of PC has taken place, HPM should

April 2005 Prepared By Jon Robson-Hurst Select Device Manager, Ports (Com + Lpt) and

April 2005 Prepared By Jon Robson-Hurst Front Panel and Keypad